Flux FBM-B 3100, Original Operating Instructions

Page: 14 / 32

14 / 32 Original operating instructions battery motor type FBM-B 3100
ENGLI
SH
3. Safety

The motor is not explosion-proof.

Do not operate in hazardous locations.

Do not transfer any flammable liquids.

Only use
the motor with the pumps FP 314 … and corresponding
liquids.

Only switch on the motor when the pump is in the liquid.

Protection class IP 44 only with protective cover.

Risk of injury due to open drive shaft.

Never operate motor without pump.

Switch off the motor before opening the clamping levers.

Wait until the motor does not turn anymore before you remove it.

Check before switching on if the motor fits properly to the pump.
The pin on the motor must be in one of the two bores. The
clamping levers must be audibly locked on the motor.

When working on the drum pump always separate battery from
motor.

If the motor cannot be switched off with the button, the motor can
be shut down by unplugging the battery in an emergency.

Do not operate in hazardous locations.

Do not transfer any flammable liquids.

Only use the pump for its intended purpose.

Never leave the pump unattended.

The pump has to be stored in a vertical position.

Install the pump in a way which ensures that it cannot fall into the
container.

Only use the pump with a suitable discharge hose.

The pump should not be immersed deeper into the liquid than the
outlet connection.

The pump should only be left standing in the liquid as long as in
operation.

Only use the pump up to max. 45°C (PP) or 60°C (PVDF and S)
liquid temperature.

Avoid dry running.

Do not expose the pump to the weather.

Clean pump after every operation.

Never store the pump in areas in which corrosive vapours exist.

When working on the drum pump always separate battery from
motor.

Avoid unintentional starting. It may lead to injuries if your finger is
on the switch while carrying.

Ensure that the hose is securely fixed to the hosetail.

Regularly check the hose and connections to ensure safe
operation.