66
6. The screws behind the second mirror control the
mirror angle shown in the picture below. Release the
nut on the screw, rotate the screw for the desired
direction and test the shot position until the two
shots overlaps. Tighten the nut slightly back to its
position when the adjustment is done.
Laser Head Displacement Adjustment
Goal: The dot on the metal ring be on the vertical center
line of the ring. The dot must be above the center point of
the ring.
1. Move the laser head to the center of the workarea
Close the door and press "Laser Pulse".
2. Check if the dot landed on the vertical
center line of the ring. If yes, skip to
Step 6
.
反射鏡
光點
second mirror
dot direction
