63
反射鏡
光點
first mirror
dot direction
left position. Make sure the dots of the top-left and the
middle-left overlaps, then go back to the original top-left
and bottom-left adjustment.
8. The screws behind the first mirror control the mirror
angle shown in the picture below. Release the nut on
the screw, rotate the screw for the desired direction
and test the dot position until the two dot overlaps.
Tighten the nut slightly back to its position when the
adjustment is done.
Adjustment guide for the screws of the mirror:
Shots made on the reference point (top-left in this
case) rarely moves when adjusting the screws. So try to
adjust the shot on the adjustable point (bottom-left in
this case) by the screws and move the point toward the
reference point until they overlap.
