Fluke VIB 5.310, User Manual, Page: 118 / 173

4-23
Reports
Service-Partner:
Kunde: Analge:luefter9
Prüfer:maier3 Messaufgabe:Getriebe - Spektrum, schnell
Gedruckt: 05.03.2008 11:27 Gemessen:05.03.2008 11:21:29
Spektrum
Cursor, Hauptdiagramm:
Name: Position: Wert: RMS
Haupt 2.00 Hz 0.001 m/s² 0.003 m/s²
Max 10: Bandalarme:
Amplitude: Frequenz: Name: Freq.: Alarm Warnung Vorwarnung: Ergebnis:
0.001 m/s²
0.000 m/s²
0.000 m/s²
0.000 m/s²
0.000 m/s²
0.000 m/s²
0.000 m/s²
0.000 m/s²
0.000 m/s²
0.000 m/s² 2.00 Hz
2650.00 Hz
8.00 Hz
2680.00 Hz
1326.00 Hz
3976.00 Hz
20.00 Hz
1608.00 Hz
2144.00 Hz
4288.00 Hz
Messaufgabe:Getriebe - Spektrum, schnell MessSetup:Beschleunigung / 10 - 6400 Hz / 3 lin. / f 2 Hz
Aufnehmer Setup:VIB 6.142
1
* only for balancing reports
Left:
Printing out the
measurement report
Right:
Measurement report
for the spectrum
• Open the customer selection menu and click on the lowest entry,
<Edit>. The customer list appears.
• Press the MENU key and click on 'New'.
• Enter the customer data in the text editor.
Inspector/Asset: Information on the inspector/asset. Click in the
corresponding text field to edit the information.
Result file name: The result file name appears in the report.
Report event: Report-specific event. Click in the text field to open
the event editor and select the event.
Result event: Here you can only set whether or not events should be
printed.
Setup info: Information on the measurement settings to be used.
Three options are available for selection:
- Standard : The name of the measurement and sensor setup is
printed.
- St evaluation : Like Standard , plus evaluation setup or
machine setup*.
- Details : Like St evaluation, plus a screen printout of
each setup.
• In the ‘Measure info’ tab, select the measurement type
information that is to appear in the measurement report (compare
example on previous page).
Printing out the measurement report
• Select the printer and the report configuration (‘Printer’ or
‘Reports’ field).
• Press the MENU key.
• Click on ‘Print’ (see below).
If you select 'PDF' as the printer, enter a file name.