Fluke ULT800, User Manual, Page: 2 / 18

Warranty and Product Support
Fluke Biomedical warrants this instrument against defects in materials and
workmanship for one full year from the date of original purchase. During the
warranty period, we will repair or, at our option, replace at no charge a prod-
uct that proves to be defective, provided you return the product, shipping
prepaid, to Fluke Biomedical. This warranty does not apply if the product has
been damaged by accident or misuse or as the result of service or modification
by other than Fluke Biomedical. IN NO EVENT SHALL FLUKE BIO-
MEDICAL BE LIABLE FOR CONSEQUENTIAL DAMAGES.
Only serialized products and their accessory items (those products and items
bearing a distinct serial number tag) are covered under this one–year warranty.
PHYSICAL DAMAGE CAUSED BY MISUSE OR PHYSICAL ABUSE IS
NOT COVERED UNDER THE WARRANTY. Items such as cables and
nonserialized modules are not covered under this warranty.
Recalibration of instruments is not covered under the warranty.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state, province to province, or country to
country. This warranty is limited to repairing the instrument to Fluke Bio-
medical’s specifications.
Warranty Disclaimer
Should you elect to have your instrument serviced and/or calibrated by some-
one other than Fluke Biomedical, please be advised that the original warranty
covering your product becomes void when the tamper-resistant Quality Seal is
removed or broken without proper factory authorization. We strongly rec-
ommend, therefore, that you send your instrument to Fluke Biomedical for
factory service and calibration, especially during the original warranty period.
In all cases, breaking the tamper-resistant Quality Seal should be avoided at all
cost, as this seal is the key to your original instrument warranty. In the event
that the seal must be broken to gain internal access to the instrument, you
must first contact Fluke Biomedical’s Technical Assistance Department at
775-883-3400. You will be required to provide the serial number for your in-
strument as well as a valid reason for breaking the Quality Seal. You should
break this seal only after you have received factory authorization. Do not
break the Quality Seal before you have contacted us. Following these steps
will help ensure that you will retain the original warranty on your instrument
without interruption.
Fluke Biomedical, 6920 Seaway Blvd., Everett, WA 98203 USA