Fluke RUSKA 7050, User Manual

Page: 51 / 88

Remote Operation
Device Messages
5
5-5
:CALibration
:POINts? Number of calibration points
:VALue? Nominal calibration point
:ZERO <number> Zero sensor to value
:PRESsure3 Reference sensor
Same as PRESsure2 above
:PRESsure4PDCR sensor
Same as PRESsure2 above
:VACuum
Same as PRESsure2 above
:TEMPerature Gas Temperature
Same as PRESsure2 above
:TEMPerature2 High Sensor Temperature
Same as PRESsure2 above
:TEMPerature3 Low Sensor Temperature
Same as PRESsure2 above
:MODE? return 1 if calibration edit enabled
:MODE <access code> Request calibration edit
DISP
:ENABle ON|OFF|1|0 Turns Front Panel Display On/Off
TEXT <string> Displays Message on Front Panel
:BGRaph<number> Sets Bar Graph Maximum
SENSE
[:PRESSure]
[:RESolution] <number> Set Pressure Display Resolution
:AUTO<boolean>|ONCE Return to Default Resolution
:MODE? Returns ABSOLUTE or GAUGE
:MODE ABSolute|GAUGe Turns On or Off Simulated Absolute
:RANGE
[:UPPer]? Returns PPI Full Scale Value in Units
:LOWer? Returns Lowest Calibrated Value
:REFerence
[:HEIGht] <number> Set Gas Head Height
:MEDium N2|AIR Set Gas Medium
STATus
:OPERation
[:EVENT]? Read/Clear Operation Event Register
:CONDition? Read Operation Condition Register
:ENABle<number> Set Operation Enable Mask
:QUEStionable
[:EVENT]? Read/Clear Questionable Event Register
:CONDition? Read Questionable Condition Register
:ENABle <number> Set Questionable Enable Mask
:PRESet Reset Condition Flags
SYSTem
:DATE <year>,<month>,<day> Set System Date
:ERRor? Returns <error#,”descr;info”>
Or 0,”No Error”
:KLOCk ON|OFF|1|0 Lock Keyboard
:TIME <hour>,<minute>,<second> Set System Time
:VERSion? Returns 1991.0
:LANGuage “6000”|”SCPI”|"500" Set Interface Protocol to 6000 or SCPI, or
Druck DPI-500
:PRESet Reset System
TEST
:ELECtronic? Perform Electronic Self-Test
STOP Abort Pneumatic Self-Test
UNIT
:DEFine<n> <name>,<number> Define a Unit
:LENGth MM|IN Set Length Units for Head Height
[:PRESsure] <unit name> Set Pressure Units. Valid unit names are
KPA, BAR, PSI, KG/CM2, MMHG0C,
CMHG0C, INHG0C, INHG60F
CMH204C, INH2020C, INH2025C, %FS
FT, M, KNOT, KM/HR, MPA, PA