Fluke RUSKA 7050, User Manual

Page: 43 / 88

Local Operation
Menu
4
4-11
4-14.bmp
Figure 4-14. Menu | Setup | System - Menu
Date/Time
The PPI’s system clock is continuously updated. If the date or time requires editing, the
following applies;
1.
The date and time are set from the Setup | System | Menu. From the Main Menu
(press PREVIOUS until the Main Menu appears), press Menu [F6] | Setup [F2] |
System [F5].
2. To set the system date, turn the rotary knob until Date is highlighted. Use the numeric
keypad to enter the current four-digit year, month, and day (yyyymmdd). All digits
must be entered. Press ENTER to accept.
3. To set the system time, turn the rotary knob until Time is highlighted. Use the
numeric keypad to enter the current hour, minute, and second (hhmmss). All digits
must be entered. Press ENTER to accept.
Reset
The Reset [F1] command is used to re-boot the PPI.
To reset the system, from the Main Menu (press PREVIOUS until the Main Menu
appears), press Menu [F6] | Setup [F2] | System [F5] | Reset [F1].