Fluke NORMA 6003, User Manual, Page: 55 / 98

Power Analyzer
Operation
49
Scope
The Scope mode is used to view the waveform of the signal under measurement. The supported
signals include voltage and current etc. Up to 4 signals can be selected simultaneously for waveform
display.
In addition, the Product provides cursor measurement function that can be used for various
measurements or calculations of waveforms. See
Measure with The Cursor
for details.
Enter Scope Mode:
•
From the Current measurement screen select ( Scope )
The Scope screen is shown in
Figure 18. Table 20
lists the items displayed on the screen.
Figure 18. The Main Screen of Scope