LinkIQ
Users Manual
30
Table 13. Ping Test Results
Item
Description
General section
IP Address
The IP address configured in
Settings
>
Ping
,
Round Trip
Times
The round trip time in ms from each time the Product pings the IP address.
Packets
shows if no packets are lost.
shows if one or more packets is lost.
Lost
The number of lost packets. For example 1/4 indicates one packet is lost
of the four packets sent.
Size
The size in bytes (typically 64 bytes) of the ping packet sent for each test.
Error
information
If one or more packets is lost, an error message shows with a description
of the problem of the first lost packet.
Network
The information that shows depends on the configuration of the network.
If the Product detects only one protocol (IPv4 or IPv6) on a network, the
information for that protocol shows. If the Product detects both protocols,
the information for both protocols shows.
Information for the DHCPv6 server shows only if the network uses
DHCPv6. If the network uses SLAAC without DHCPv6, the DHCP server
address, offer, ACK, and lease times do not show.
My IPv4 or
My IPv6
The address the Product receives from the DHCP server as an offer or the
user-defined static address.
Subnet Mask
The subnet mask of the network the Product connects to and tests on.
DHCP Server
The IP address of the DHCP server.
Offer Time
For IPv4 addresses, this is the length of time between when the Product
sends the discovery signal and receives an address offer from the DHCP
server.
For IPv6 addresses, the DHCPv6 advertised time shows. The advertised
time is the time between when the Product sends the DHCPv6 solicit
packet and receives the advertise response packet.
Summary of Contents for LinkIQ
Page 46: ...LinkIQ Users Manual 42 ...
