Fluke LinkIQ, User Manual

Page: 32 / 46

LinkIQ
Users Manual
28
Item Description Funcition

Advertised
speeds
Shows the advertised speeds of the device and whether they
have full-duplex or half-duplex capability at the advertised speed.
Speeds in black indicate the switch advertises that speed.
Speeds in gray indicate the switch does not advertise that speed.
Full Duplex
A check mark (
Y
) indicates the device can send and receive
communication simultaneously at the advertised speed.
A dash (—) indicates the device does not have full-duplex
capability at the advertised speed.
Half Duplex
A check mark (
Y
) indicates the device can send and receive
communication but not simultaneously at the advertised speed.
A dash (—) indicates the device does not have half-duplex
capability at the advertised speed.
A blank space indicates that half-duplex capability is not available
at the advertised speed.

Ping summary
button
This button shows only when Ping is enabled.

: Indicates the test passes.

: Indicates the test fails.

The maximum round trip time in ms of the 4 ping attempts or
-- ms if no ping attempts are successful.

The IP address of the device on the network that is pinged.
Tap to open the Ping screen to view detailed ping results. See
Ping Test Results .

PoE test results
PoE results show only when PoE is on and the Product is
connected to a PoE device. If needed, scroll down to see all the
results. See PoE Test Results .
Table 11. Switch Test Results (cont.)