12
FIBER O
NE
S
HOT
P
RO
Users Manual
4
Push the swab into the connector, twist it around 3 to 5
times against the endface, then discard the swab.
5
Twist a dry swab around in the connector 3 to 5 times.
6
Use a video microscope to inspect the connector. If
necessary, clean and inspect the connector again.
To clean connector ends:
1
Use a video microscope to inspect the connector. If it is dirty,
continue to step 2.
2
Touch the tip of an optical-grade solvent pen or swab
soaked in solvent to a dry, optical-grade wiper.
3
Rub the connector endface across the solvent on the wiper,
then rub it two times across the dry area of the wiper.
4
Use a video microscope to inspect the connector. If
necessary, clean and inspect the connector again.
Note
A different procedure is necessary to clean some
connector styles (for example, VF-45).
Protect Connectors
Always put protective caps on connectors that you do not use.
Clean the caps periodically with a swab or wipers and fiber optic
solvent.