27
7 Digital Communications
is sent with the command following a “=”. For example, “s=150.0” sets the set-point to 150.0
degrees.
In the following list of commands, characters or data within brackets, “[” and “]” are optional
for the command. A slash, “/”, denotes alternate characters or data. Numeric data, denoted by
“
n
”, may be entered in decimal or exponential notation. Characters are shown in lower case al-
though upper case may be used. Spaces may be added within command strings and will simply
be ignored. Backspace (BS, SCII 8) may be used to erase the previous character. A terminating
CR is implied with all commands.
1.888.610.7664
Fluke
-
Direct
.com
