1
Before You Start
The Fluke Calibration 9102S Dry-Well Calibrator (the Product or the Calibrator) is a small portable
instrument for quick on-site checks and calibration of thermocouple and RTD temperature probes. The
Product is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be
done over a range of -10
°
C to 122
°
C (14
°
F to 252
°
F). Temperature display and setpoint resolution
are 0.1
°
.
The Product features:
•
A controlled temperature block with two calibration insert sleeves
•
Rapid heating and cooling
•
Prop stand
•
Handle strap
•
RS-232 interface capability
•
+12 V dc battery option
Built-in programmable features include:
•
Temperature scan rate control
•
Eight set-point memory
•
Adjustable readout in
°
C or
°
F
The temperature is accurately controlled by Fluke Calibration’s digital controller. The controller uses a
precision platinum RTD as a sensor and controls the well temperature with transistor-driven
thermoelectric devices.
The LED front panel shows the current well temperature. Use the control buttons to set temperature to
any desired temperature within the Product’s range. Multiple fault protection devices ensure user and
Product safety and protection.
The Product is portable, low cost, and easy to operate. Through proper use and maintenance, the
Product provides continued accurate calibration of temperature sensors and devices. The user should
be familiar with the safety guidelines and operating procedures of the calibrator as described in this
manual and the
Safety Information
that ships with the Product.
