9102S
User’s Guide
16
The proportional band width is easily adjusted from the front panel. The width may be set to discrete
values in degrees C or F depending on the selected units. The proportional band adjustment is
accessed within the secondary menu. Press
SET
and
EXIT
to enter the secondary menu and show the
heater power. Then press
SET
to access the proportional band.
S
+
E
Access heater power in secondary menu
SEC
Flashes SEC for secondary menu and then displays the heater power
12.0P
Heater power in percent
S
Access proportional band
PrOP
Flashes prop and then displays the setting
4.1
Proportional band setting
To change the proportional band press
u
or
d
.
10.0
New proportional band setting
To accept the new setting press
SET
. Press
EXIT
to continue without storing the new value.
S
Accept the new proportional band setting
Controller Configuration
The Product has a number of configuration and operating options and calibration parameters which are
programmable from the front panel. These are accessed from the secondary menu after the
proportional band function by pressing
SET
. Press
SET
again to enter the first of three sets of
configuration parameters — operating parameters, serial interface parameters, and calibration
parameters. The menus are selected with
u
and
d
and then pressing
SET
.
Operating Parameters
The operating parameters menu is indicated by:
PAr
Operating parameters menu
The operating parameters menu contains the High Limit parameter.
