810 Getting Started
Manual Supplement
3/10
1
Change #1
On page 3, prior to
Heat Sink
add the following:
gbk15.eps
On page 4, replace
&
with the following:
&
Smart Battery Pack Charger and Adapters
On page 6, under the
Note
:
Change:
Red – battery is connected to the power source.
To:
Red – battery is connected to the power source and charging.
On page 11, following the
Note,
replace the paragraph with the following:
Push
+
to turn on the Tester. At power up, the Tester displays the remaining memory and the battery status.
Push
+
and hold two seconds to turn off the Tester. The battery status icon
.
and the set date and time
appear at the top of the display.
