Pressure Calibrator
Product Features
23
4.
Push
to select the necessary probe type (see the
figure below). Push
to store the change and go to
the Main Menu.
Note
The default probe type is PT100-385.
SELECT RTD PROBE TYPE
hix036.eps
5.
Connect the RTD Probe.
The standard probe has a 10-inch insertion depth with a
¼-inch diameter stainless steel sheath. See Figure 5.
Note
The factory default type is PT100-385 so if the
Product is used with the Fluke 720 RTD Probe
(pn 4366669), it is not necessary to set the
probe type. Connect the probe to the Product
and configure the display to read temperature.
The display shows “OL” when the measured
temperature is outside the nominal
measurement range of the RTD function (below
-40
°
C or above 150
°
C).
www.
GlobalTestSupply
.com
Find Quality Products Online at:
