5)
The serial number is located on the upper right corner of the back panel.
When contacting an Authorized Service Center, use the serial number
and model number.
6)
If the bath is supplied with a serial RS-232 interface, the interface cable
attaches to the back of the bath at the connector labeled “RS-232”.
7)
If the bath is supplied with a GPIB IEEE-488 interface, the interface ca-
ble attaches to the back of the bath at the connector labeled “IEEE-488”.
7.4
Bath Tank and Lid
There are two different types of lids. They both have the same overall dimen-
sions but the optional lid (see Figure 5) has a recirculating pump and the stan-
dard lid has a stirring motor with rectangular access hole. Their features are
described with reference to figure numbers as follows:
7012 Calibration Bath
User’s Guide
24
Figure 4
Back Panel
