572-2
Users Manual
16
Maintenance
Battery Charge
Use the battery charge symbols to gauge the approximate level of charge left on the
batteries.
Note
When in low battery mode, the Product does not store values.
“Err” shows on the display if attempted.
Batteries are at 5 %. Before taking further
readings, the batteries must be changed.
Battery Replacement
Warning
To prevent possible electrical shock, fire, eye damage, and
personal injury:
•
Do not open the Product. The laser beam is dangerous
to eyes. Have the Product repaired only through an
approved technical site.
•
Have an approved technician repair the Product.
For safe operation and maintenance of the Product:
•
Repair the Product before use if the batteries leak.
•
Be sure that the battery polarity is correct to prevent
battery leakage.
Caution
•
Do not short the battery terminals together.
•
Do not keep cells or batteries in a container where the
terminals can be shorted.
•
Do not put battery cells and battery packs near heat or
fire. Do not put in sunlight.
Note
The batteries should be replaced in less than one minute after
removal to avoid manually re-initializing the Product clock and
date.
To install or change the two AA batteries (see Figure 8):
1. Slide the locking tab on the battery door to the “
” position and then open the
handle.
2. Insert the batteries noting their correct polarity.
3. Close and lock the handle.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
