572-2
Users Manual
6
Save
To save readings:
1. Pull the trigger to take a measurement.
2. Release the trigger to stop taking the measurement.
3. Push the
Save
softkey to enter the Save menu.
4. Push the
Yes
softkey to save the reading.
The reading is assigned a memory location and a time and date stamp.
The reading includes:
•
IR
temperature
•
Emissivity
•
Date/Time
You can also push the
Cancel
softkey to abort saving the reading.
Light
The Product has a backlit display with two brightness levels. The
Light
softkey is
used to adjust the backlight brightness. The backlight is on each time the trigger is
pulled.
To toggle the backlight brightness, push the
Light
softkey.
The backlight can be disabled using the Setup menu. See “Setup” for more
information.
Memory
The Product can store measurement records including time, date, emissivity, and
measurement record numbers (see “Save” for more information). The Product can
store 99 records.
To access records stored in memory:
1. Push the
Menu
softkey until
Mem
shows as the left softkey function.
2. Push the
Mem
softkey to access the Memory menu. Saved readings can be
read.
Emissivity Menu
The Emissivity menu includes a list of pre-defined materials and lists their typical
emissivity values, see Table 3. For further information, see “Emissivity”.
Note
Default emissivity is 0.95.
To access the Emissivity menu:
1. Push the
Menu
softkey until
(emissivity) shows as the right softkey function.
2. Push the
softkey.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com