Symbol
Description
Canadian Standards Association
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1 re-
fers to the level of Impulse Withstand Voltage protection provided. Equipment of
OVERVOLTAGE CATEGORY II is energy-consuming equipment to be supplied from
the fixed installation. Examples include household, office, and laboratory appliances.
C-TIC Australian EMC Mark
The European Waste Electrical and Electronic Equipment (WEEE) Directive
(2002/96/EC) mark.
1.2
Safety Information
Use this instrument only as specified in this manual. Otherwise, the protection
provided by the instrument may be impaired.
The following definitions apply to the terms “Warning” and “Caution”.
•
“WARNING” identifies conditions and actions that may pose hazards to
the user.
•
“CAUTION” identifies conditions and actions that may damage the in-
strument being used.
1.2.1
WARNINGS
To avoid personal injury, follow these guidelines.
•
DO NOT
use this instrument to measure the temperature of any hazard-
ous live component.
•
DO NOT
use this unit for any application other than calibration work.
•
DO NOT
use this unit in environments other than those listed in the
user’s manual.
•
Use of this instrument at high temperatures for extended periods of time
can cause the handle to become hot.
•
Follow all safety guidelines listed in the user’s manual.
•
Calibration Equipment should only be used by Trained Personnel.
1.2.2
CAUTIONS
To avoid possible damage to the instrument, follow these guidelines.
•
DO NOT
remove the label from the handle. This cautions the user con-
cerning the delicate nature of the instrument.
5680/5682/5689 SPRT
User’s Guide
2
1.888.610.7664
Fluke
-
Direct
.com