Fluke 55XXA Instructions Download Page 2

Page: 2 / 4

55XXA

Instructions

Contact Fluke Calibration

Fluke Corporation operates worldwide. For local contact information, go to our website:

To register your product, view, print, or download the latest Users Manual or manual supplement,
go to our website.

Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090

+1-425-446-5500

Kit Contents

Check to make sure that all of the listed parts are included:

Assemble the Handles

Attach the 2 side handles to the 4 corner handles. See

. For each pair of corner

handles, use a Phillips screwdriver to tighten 2 M5X10 screws (torque to 12.5 in-lbs) and 2

strap washers to screw a side handle to the center of each of the corner handles. Once

assembled, set the handles aside.

Figure 2. Side Handle and Handle Assembly

• (4) Corner Handles
• (2) Side Handles
• (4) Cross Bars
• (16) M3x8 Cross Bar Screws
• (20) M4x10 Handle Screws

• (4) M5x10 Screws
• (4) Strap Washers
• (1) Display Cover/Pouch with Straps
• (4) Top and Bottom Display Cover/

Pouch Straps.

M5X10 Screw

Strap Washer

Corner Handle

Side Handle

Summary of Contents for 55XXA

Page 1: ...otection and add more hand holds to make the Product easier to lift The display cover pouch protects the front panel and can hold assorted test leads or other items Figure 1 55XXA Portability Kit Inst...

Page 2: ...luded Assemble the Handles Attach the 2 side handles to the 4 corner handles See Figure 2 For each pair of corner handles use a Phillips screwdriver to tighten 2 M5X10 screws torque to 12 5 in lbs and...

Page 3: ...standard handles Use five screws for each handle All 20 M4 handle screws require a Torx T20 drive Tighten to a torque of 12 5 in lbs 5 Attach the top panel rear cross bar to the Product See Figure 3...

Page 4: ...down 8 Attach the bottom panel rear cross bar to the bottom of the Product Remove the screws and replace the cross bar 9 The steps to attach the bottom panel front cross bar are similar to the steps t...