Multimeters
Measurements
15
< 70
hhc05.eps
Figure 3. Measure Resistance/Continuity
106 & 107
Users Manual
16
Test Diodes (107 Only)
1. Turn the rotary switch to
.
2. Push the YELLOW function button twice to activate Diode Test.
3. Connect the red test lead to the
terminal and the black test lead to the COM terminal.
4. Connect the red probe to the anode side and the black test lead to the cathode side of the
diode being tested.
5. Read the forward bias voltage value on the display.
6. If the polarity of the test leads is reversed with diode polarity, the display reading shows .
This can be used to distinguish the anode and cathode sides of a diode.
