Fluke 05-443, User Manual

Page: 12 / 28

05-443/05-444
Users Manual
4
Symbols
Table 1 shows the symbols used in this manual or on the Product.
Table 1. Symbols
Symbol Description

Risk of Danger. Important information. See Manual.

Hazardous voltage. Risk of electric shock.

AC (Alternating Current)

Protective conductor terminal

Conforms to European Union directives

This product complies with the WEEE Directive (2002/96/EC) marking
requirements. The affixed label indicates that you must not discard this
electrical/electronic product in domestic household waste. Product
Category: With reference to the equipment types in the WEEE Directive
Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted
municipal waste. Go to Fluke’s website for recycling information.
General Specifications
Detectors .................................................................. Internal G-M detectors
Display ...................................................................... 4-digit LED display with 2 cm (0.8 in.) character height
Display Range .......................................................... 000.0 to 9999
Display Units ............................................................ Can be made to display in: µR/hr, mR/hr, R/hr, µSv/h, mSv/h, Sv/h,
µrem/hr, mrem/hr, rem/hr, cpm, cps, and others
Linearity .................................................................... Readings within 10 % of true value with detector connected
Operating Range:
05-443 and 05-443-2200 ................................... 1 µSv/h to 10 mSv/h (0.1 mR/hr to 1 R/hr)
05-444 ................................................................ 0.01 mSv/h to 100 mSv/h (1 mR/hr to 10 R/hr)
Response .................................................................. Typically 3 seconds from 10 % to 90 % of final reading
Status (green light) .................................................. Indicates the instrument is functioning properly
Low Alarm ................................................................. Indicated by a yellow light and slow beep (1 per second) audible tone
(can be set at any point from 0.0 to 9999)
High Alarm ................................................................ Indicated by a red light and a fast beep (4 per second) audible tone
(can be set at any point from 0.0 to 9999)
Note
Audible indicators can be configured as a single beep by dipswitch if
desired. Audio intensity is controlled by rotating the baffle on the
audio device.
DET Fail ..................................................................... Indicated by a red light and an audible tone greater than 68 dB at
2 m (6.1 ft) for conditions of detector overload, no count from
detector or instrument failure
Low Bat ..................................................................... Indicated by a yellow light, beginning when 2 hours of battery life
remain
Connector ................................................................. Series “C” (others available)
Calibration Controls ................................................ Accessible from the front of instrument (protective cover provided)