
59
10 Digital Communication Interface
Power Control Functions
Command Description
Command
Format
Command
Example
Returned
Returned
Example
Acceptable
Values
Set cutout to be reset
automatically
cm[ode]=a[uto]
cm=a
Serial Interface Menu
Read serial sample setting
sa[mple]
sa
sa: 9
sa: 1
Set serial sampling setting to
n
seconds
sa[mple]=n
sa=0
0 to 4000
Set serial duplex mode:
du[plex]=f[ull]/h[alf]
FULL or HALF
Set serial duplex mode to full
du[plex]=f[ull]
du=f
Set serial duplex mode to half
du[plex]=h[alf]
du=h
Set serial linefeed mode:
lf[eed]=on/of[f]
ON or OFF
Set serial linefeed mode to on
lf[eed]=on
lf=on
Set serial linefeed mode to off
lf[eed]=of[f]
lf=of
Calibration Menu
Read C0 calibration parameter
*c0
*c0
b0: 9
b0: 0
Set C0 calibration parameter to
n *c0=n
*c0=0
–999.9 to 999.9
Read CG calibration parameter
*cg
*cg
bg: 999.99
bg: 156.25
Set CG calibration parameter to
n
*cg=n
*cg-156.25
–999.9 to 999.9
Read low set-point limit value
*tl[ow]
*tl
tl: 999
tl: –80
Set low set-point limit to
n
*tl[ow]=n
*tl=-80
–999.9 to 999.9
Read high set-point limit value
*th[igh]
*th
th: 999
th: 205
Set high set-point limit to
n
*th[igh]=n
*th=205
–999.9 to 999.9
Miscellaneous (not on menus)
Read firmware version number
*ver[sion]
*ver
ver.9999,9.99
ver.2100,3.56
Read structure of all commands
h[elp]
h
list of commands
Read Heater
f1
f1
f1:9
f1:1
Set Heater
f1=1/0
(1=high, 0=low)
0 or 1
Set heater to low
f1=
n
f1=0
Set heater to high
f1=
n
f1=1
Legend:
[] Optional Command data
{} Returns either information
n Numeric data supplied by user
9 Numeric data returned to user
x Character data returned to user
Note:
When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a
carriage return and linefeed. Then the value is returned as indicated in the RETURNED column.
Interface Command Summary continued