Page 6
FW_B-SMART_v0306-01_EN.docx
Standard outputs
•
Configurable pulse output to transmit pulses representing a certain total quantity. The pulse
length can be set to be short (5 msec.
– max. 100Hz.), intermediate (15msec. – max. 33Hz) or
long (100msec.
– max. 5Hz.).
•
Configurable linear 4-20mA analog output with 10-bits resolution representing the actual
flowrate. Flowrate levels as well as the minimum and maximum signal output can be tuned.
Configuration
The B-SMART has been designed to be implemented in many types of applications. For that reason,
a SETUP-level is available to configure your B-SMART according to your specific requirements.
It includes several important features, such as K-Factor, measurement units, signal selection etc.
All settings are stored in an EEPROM memory and will not be lost in the event of a power failure or a
drained battery.
Display information
The B-SMART has a LCD with
seven 12mm (0.47”) and seven 7mm (0.28”) digits and several
symbols. Flowrate is displayed as main information while total and accumulated total will be
displayed after pressing the SELECT button.
Backlight
A backlight is standard available (externally powered only).
