fluidra Astral Pool IHPt127, Installation Instructions Manual

Page: 12 / 28

③ ④ ①
4.2 Color screen wire controller function introduction
4.2. 1Booting and shutdown
As shown in figure 1
.
1:
In shutdown status, click
①
then the unit will be booted
In booting status, click
①
then the unit will be shut down
.
4
.
2
.
2 Mode switch and target temperature Setting
2
.
2 1 Mode switch
In the main interface, click mode button or inlet water temperature setting
button, interface displays as follows:
②
Click the refrigeration mode button
①
, automatic mode button
②
or
heating mode button
③
then you can select the corresponding mode
.
Note: when the unit is designed for single automatic mode or single
thermal mode, the mode can not be switched
.
2
.
2
.
2Target temp
.
setting
Clice the temperature set button
④
,
you can set the target temperature
.