Figure 53. Configurator (WHITELIST / BLACKLIST dialog)
• The
WHITELIST / BLACKLIST
dialog will be shown
).
2.
Choose the type of list to be uploaded by clicking the correct
List
Type:
radio button.
3.
Click the
Choose File
button. Upload the saved *.CSV file using
the upload dialog.
• The contents of the uploaded *.CSV file will be shown in
the
Whitelist / Blacklist Status
section.
To apply the list settings contained in the *.CSV file, click the
Apply
Settings
button.
To clear the Whitelist or Blacklist settings without deleting the *.CSV file,
click the
Clear Whitelist/Blacklist
button.
To delete the Whitelist or Blacklist *.CSV file, click the
Reset
button.
6.6.5. Multicast
Multicast management for mesh network-capable devices
Multicast is a group-communication method in which data transmissions
are addressed simultaneously to more than one destination computer.
Multicast transmissions can be point-to-multipoint, or multipoint-to-
multipoint.
By default, if CCTV cameras and devices that operate in a similar fashion
are linked to a Fluidmesh transceiver unit operating in
Mesh Point
mode,
the unit forwards all multicast traffic generated by the cameras to the
closest
Mesh End
unit in the wireless network.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 107 of 180