10
Note: A large bucket is required for filling (Not included)
Tank Filling and Water Treatment
Open the rear upper yellow tank plug and insert hose into tank
(rotating the impeller slightly may be necessary to allow the
hose to pass), move the tank adjuster handle to level 20 and
begin filling. Do not fill the tank higher than the level indicator
on the front of the clear shell. A properly filled tank holds ap-
proximately 8liters of water.
Warning: Do not under any circumstances put fingers
into the tank. Use the end of the hose to
move the impeller should the need arise.
Water Treatment Procedures:
1. Add Chlorine tablet.
2. Wait a minimum of 72 hours. Then
add very small amount of blue dye and
check for desired color. Important! Do
not add blue dye for at least 72 hours
following Chlorine treatment. The blue
dye adds visual appeal as well as cutting
down the amount of light affecting the tank
water, thus extending the amount of time
between water treatments.
Note: The blue dye
is extremely concen-
trated and will readily
stain carpet or cloth-
ing.
Caution:
Use a drop cloth when filling or adding blue dye
Blue Dye
Yellow tank
plug
Filling hose and
funnel
