7. The manufacturers may not be held liable for any product or data loss, equipment damage or loss, equipment or
business downtime, personal injury or death which is either directly or indirectly caused by the system hardware or
software, regardless of the cause of the failure.
8. If the above warranty conditions can not be agreed upon or are deemed unacceptable by the client, then the client
must contact their supplier immediately to arrange a resolution, and must not use the SmartFill GEN 2 system until
a resolution is agreed.
4.2
Special notes for use with generators.
WARNING
1. To enable the manufacturers to fully warrant any system connected to a portable generator, the system MUST be
designed so that it is impossible for the generator to be started or stopped while the SmartFill GEN 2 is electrically
connected to the generator power output. The SmartFill GEN 2 must only be powered up after the generator is
running with a stable regulated power supply, and must be disconnected from the power supply before the generator
is turned o.
2. At the very minimum a power failure relay and current sensing relay will be required when generator power is used.
7
