/ 5 /
PREPARING YOUR GRAPHICS CARD
STEP 1
REMOVING FACTORY PROVIDED BACKPLATE
Remove all encircled screws using Phillips screwdriver. All heat sink assembly
screws should be removed, including self-adhesive washers on both sides of
the PCB (if present).
STEP 2
REMOVING STOCK COOLER
Remove all encircled screws using Phillips screwdriver (4 spring) and 4mm
hex socket. All heat sink assembly screws should be removed, including self-
adhesive washers on both sides of the PCB (if present). After you remove the
housing do not forget to unplug the fans.
STEP 1
STEP 2
