/ 10 /
CONNECTING THE D-RGB LED STRIP
Plug the 4-pin connector from Water block’s D-RGB LED light to the DRGB
HEADER on the motherboard. The LED will work if the pin layout on the header
is as follows:
+5V, Digital, empty, Ground
.
Please ensure that the arrow indicated on the connector is plugged
into the +5V line as indicated on your motherboard. If you put LED
Diode to the 12V RGB HEADER you can damage the LEDs.
Connector is the same on D-RGB and RGB versions, but D-RGB
version has 3 cables from connector to PCB; RGB version has 4
cables. If you connect D-RGB led to ordinary RGB header you can
damage your motherboard or LED strip.
D-RGB Header
RGB Header
