Fluance Ai61 User Manual
7
3. Connect the power adapter to the back of the Active Speaker and set the power switch
to the ON position.
Product Setup
1. Position the speakers with the Active Speaker on the right and the Passive Speaker
on the left.
2. Connect one end of the speaker wire to the binding posts on the back of the
Active Speaker and connect the other end of speaker wire to the binding posts on the
back of the Passive Speaker.
IMPORTANT: Ensure the same color wire is connected to the same color binding posts
on each speaker.
Passive Speaker
Active Speaker
NOTE: If placing the speakers in a cabinet or on a shelf, position the front of
the speakers as close as possible to the front edge of the shelf for optimum
audio performance.
NOTE: The included speaker wire is 8ft. If placing your speakers further than 8ft
apart it is recommended to use standard 18 gauge speaker wire to connect the
speakers over the longer distance.
Loosen the
binding post
Insert speaker
wire through hole
Tighten the
binding post
