Flowserve Limitorque MX Device Net Field Unit Page 44 User Instructions Download | Manualshive

Page: 44 / 44

background image

flowserve.com

To find your local Flowserve representative:

For more information about Flowserve Corporation, visit
www.flowserve.com or call USA 1 800 225 6989

Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended

function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide

variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The

purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user

should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve

products in connection with the specific application.

While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as

a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this

product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice.

Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.

© 2005 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.

FCD LMENIM2328-00 Printed in USA.

United States

Flowserve Corporation

Flow Control

Limitorque Actuation Systems

5114 Woodall Road

P.O. Box 11318

Lynchburg, VA 24506-1318

Telephone: 1 434 528 4400

Telefax: 1 434 845 9736

«
...
42
43
44

Summary of Contents for Limitorque MX Device Net Field Unit













































Reviews:

No comments

Related manuals for Limitorque MX Device Net Field Unit

Brand: Salvatori Pages: 20

Talis Puro 13148000

Brand: Hans Grohe Pages: 32

CRANE & Mansion Series

Brand: Anzzi Pages: 16

Brand: Endura Flap Pages: 2

Brand: Danze Pages: 8

SKYRIDGE KF1713

Brand: Kalia Pages: 12

Brand: Nivito Pages: 6

Brand: Premier Pages: 2

Brand: Tylo Pages: 61

Brand: Premier Pages: 8

GalvinSafe 190.82.11.90

Brand: Galvin Engineering Pages: 7

Brand: Hans Grohe Pages: 64

Raindance E 150 AIR 3-Jet Handshower...

Brand: Hans Grohe Pages: 1

Smart Command Eco Valve

Brand: Caroma Pages: 28

A152 8-BF4 Series

Brand: Murdock Pages: 23

Brand: AquaticLife Pages: 11

Chicago Faucets 312-ABCP

Brand: Geberit Pages: 2

Brand: Geberit Pages: 244

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands