Argus
Safety Standards
5
Safety Standards
Depending on the type and pressure rating, ARGUS ball valves are designed to conform with national and
international regulations, such as DIN 3357, AD and VdTÜV-Merkblätter, TRbF, TRGL, TRD, TRG, DVGW,
BS 5351, API6D and ANSI B16.34.
Design certifications and DIN-DVGW certificates are available. The acceptance of the fittings is carried out
according to DIN 3230 or specific customer requirements.
The reliability of fittings sealed with soft materials in case of fire, or even at temperatures above +600 °C is
confirmed by the Fire-Safe Certificate and can be verified using BS 6755and/or API 607.
Authorized testing institutions such as TÜV, German Lloyd, BS, Lloyds Register, DNV, Bureau Veritas, etc.,
carry out further tests on behalf of ARGUS or customers at regular intervals.
Compliance with Quality Assurance procedures under ISO 9001 was certified by DQS (German Society for
Quality Assurance).
Pressure-Temperature Diagrams
FK76-01-001 0000-01-001 0000-01-002
Delivery/Storage
Check on Delivery
Lieferschein
delivery note
bordereau de livraison
Bestellnummer:
order number:
numØro de commande:
0000-00-002
At delivery compare the order number on the delivery note with the number on the rating plate (see figure
above). In addition check that the correct item has been delivered and that the delivery is complete.
Complaints submitted at a later date cannot be accepted.
Storage of the Ball Valves
Ball valve must be set to OPEN.
Store ball valve in dry rooms.
Protect ball valve against dirt.
Protective caps must remain in position until the valves are finally installed.
三千控制阀网
www.cv3000.com
