|
2
QS300820 Rev A2
WELCOME TO THE ECHOTOUCH
®
QUICK START
The EchoTouch
®
Quick Start provides basic mounting, setup and use instructions for getting the
EchoTouch
®
up and running quickly. If you have a non-standard installation or setup requirement that is
not addressed here, please refer to the EchoTouch
®
Manual or other support documentation located at
flowline.com.
WE DO YOUR LEVEL BEST
Thank you for purchasing EchoTouch
®
. The transmitter provides WebCal
®
software configuration (all models)
or integrated LCD and three push-button configuration (US06 series only). This quick start includes everything
you’ll need to get the transmitter up and running.
COMPONENTS
Depending upon the transmitter part number shipped, EchoTouch
®
comes with the Quick Start and a Viton
®
gasket for installation with G threaded versions only.
EchoTouch
®
US01-0001-00
US01-0001-01
US01-0011-00
US01-0011-01
EchoTouch
®
US03-0001-00
US03-0001-01
US03-0011-00
US03-0011-01
EchoTouch
®
US06-0003-00
US06-0003-01
US06-0013-00
US06-0013-01
USB
®
Key Fob
P/N: LI99-2001
Viton
®
gasket (2”)
P/N: 200129
G threaded version
only
WebCal
Configuration Only
WebCal
Configuration Only
Push Button or
WebCal
Configuration
ENCLOSURE
While the enclosure housing is liquid-resistant the EchoTouch
®
transmitter is not designed to be operational
upon being immersed. It should be mounted in such a way that the enclosure and transducer do not come into
contact with the application media under normal operational conditions. Before closing the enclosure (US06
series only), make sure that the enclosure gasket is properly seated, and that any conduit fittings, cable
connectors or plugs are installed correctly and sealed.
Note:
If using the Flowline LM90-1001 (liquid tight
fitting) on the ½” conduit, the cable minimum is 0.170” (4.3mm) and the maximum is 0.450” (11.4mm).
CONFIGURATION
When configuring EchoTouch
®
, choose either the WebCal
®
(all versions of EchoTouch
®
) or Push Button
method (US06 series only). Changes to the configuration can be made using the alternative method. When
beginning with one method, it is recommended to complete the configuration before using the other method to
make any adjustments.