Hanging Furniture Stand (FHHFS) Assembly Instructions
1.
Open package and check for all components. Discard and recycle
packing materials.
2.
Starting with the tripod top and using the large nuts and bolts,
attach
the
A
joints together. Continue by attaching the
B
joints to
each other, and then again with the
C
joints. (This is easiest done
by laying the stand on one side, and rotating it as you attach each
new joint.)
3.
For the base, slide one curved base pole through the sleeve on the bottom of the arms, connect a
second base pole and place mid-sized silver screw through the lined-up holes of all 3 pieces. Secure
with nut.
4.
Continue attaching curved base poles to each other, threading through sleeve when necessary. Smaller
nuts and bolts connect curved base poles to each other, mid-sized ones connect base to sleeves at
bottom of arms.
5.
Place Hanging Furniture Stand on base, and double check all nuts and bolts are secure and fully
tightened.
6.
Attach your FlowerHouse Hanging Bed to Hanging Furniture Stand with
the locking carabineer to eyelet at peak of tripod. Assure carabineer is in the
locked position before using.
Lay back and ENJOY
!
Instructions current as of January 2018