Page 6 of 16
4C Depot Installation Manual—206731—Rev C
www.florencemailboxes.com
PREPARATION AND INITIAL PLACEMENT
1 .
Place the 4C cabinet in the desired installation location.
2 .
Remove the lower-front panel from the cabinet.
• Use the #2 square-tip 1/4” hex-shank insert
driver bit supplied in the package of
hardware, placed into a cordless driver, to
remove the two (2) screws from the panel.
• Pull the panel out at the bottom and down
from behind the 4C mailbox trim.
square-drive screws
