3
FHEHS 900 A1
GB
IE
Package contents
1 Motor unit FHEHS 900 A1
1 Hedge trimmer attachment FHS 1 (hereinafter hedge trimmer)
1 Pole pruner attachment FHE 1 (hereinafter pole pruner)
Accessories
1 Shoulder strap
1 Protective cover for the chain
1 Protective cover for blade
1 100 ml organic chain oil
1 Mounting tool
1 User manual
Technical data
Motor unit
FHEHS 900 A1
Rated voltage:
230 V ~ 50 Hz
Nominal power:
900 W
Protection class:
II /
Weight:
(without handle and
carrying strap):
approx. 2.6 kg
Pole pruner:
FHE 1
Weight (ready for use):
approx. 1.6 kg
Recommended fi ll level (oil tank) 100 ml
Cut length:
approx. 260 mm
Blade:
Oregon Type 91 100SDEA041
Saw chain
Oregon 91P040X
Oregon
91P040E
Hedge trimmer
FHS 1
Idle speed:
2000 min
-1
Cut length:
410 mm
Tooth spacing:
20 mm
Weight (ready for use):
approx. 2.1 kg
Noise and vibration data:
The A-rated noise level of the power tool is typically as follows:
Pole pruner:
FHE 1
Sound pressure level:
88.18
dB(A)
Uncertainty K:
3
dB
Sound power level:
100.63
dB(A)
Uncertainty K:
3
dB
Hedge trimmer
FHS 1
Sound pressure level:
87.08
dB(A)
Uncertainty K:
3
dB
Sound power level:
98.37
dB(A)
Guaranteed
sound power level:
102
dB(A)
Uncertainty K:
3
dB
Vibration values (vector total of three directions) determined in accordance
with EN 60745
Pole pruner:
Vibration at the front handle: Vibration emission value
a
h,D
= 1.018 m/s
2
Uncertainty K = 1.5 m/s
2
Vibration at the rear handle: Vibration emission value
a
h,D
= 1.213 m/s
2
Uncertainty K = 1.5 m/s
2
Hedge trimmer
Vibration at the front handle: Vibration emission value
a
h,D
= 1.447 m/s
2
Uncertainty K = 1.5 m/s
2
Vibration at the rear handle: Vibration emission value
a
h,D
= 1.773 m/s
2
Uncertainty K = 1.5 m/s
2
Wear hearing protection!
NOTE
►
The vibration level specifi ed in these instructions has been measured
in accordance with a standardised measuring procedure specifi ed in
EN 60745 and can be used to make equipment comparisons. The
specifi ed vibration emission value can also be used to make an initial
exposure estimate.
WARNING!
►
The vibration level varies in accordance with the use of the power
tool and may be higher than the value specifi ed in these instructions
in some cases. There is a risk of underestimation of the vibration load
if the power tool is used regularly in this manner. For an accurate
estimate of the vibration load during a specifi c working period, the
periods during which the appliance is switched off or is running but
not actually being used must also be taken into consideration. This
can signifi cantly reduce the vibration load over the total working
period.
Explanation of symbols on the appliance!
Read the operating instructions and safety
advice before initial operation.
Wear protective gloves!
Wear safety shoes!
Wear ear protection!
Wear a hard hat!
Wear protective glasses!
IB_102878_FHEHS900A1_LB3.indb 3
13.11.14 14:31
