FLORABEST 315958-1904, Assembly And Safety Advice

Page: 12 / 46

12 GB/IE
Introduction
List of Pictograms Used
Read the instructions!
Observe the warnings
and safety notices!
Safety notices
Instructions for use
Granite Parasol Base
Introduction
Congratulations on the
purchase of your new
product. You have chosen
a high-quality product. The assembly
and operating instructions are part
of this product. Please read through
all of these instructions and take note
of the advice they contain before
starting with assembly. These instruc-
tions contain important assembly
and care information. Keep these
instructions safe and also include
them if you pass the product on to
others.
Intended use
The parasol stand is suitable as a
stand for patio umbrellas with a
specific pole diameter of 25, 32
and 38 mm, and a maximum pro-
jected umbrella area of 2.50 m
2
.
The wind force mustn‘t exceed ap-
prox. 25 km/h. Close the umbrella
in stronger winds. The umbrella stand
is only intended for private use. It is
not suitable for commercial use.
Parts description
1
Screw with spring ring, washer
and rubber washer
2
Rubber washer
3
Stand tube
4
Clamping plate
5
Inserts (3 pieces)
6
Wing bolt (2 pieces)
7
Granite base
Technical Data
Item no.: 316032_1904
Height of base
in cm:
6.5