rugdoctor.com 1-800-784-3628
11
10
rugdoctor.com 1-800-784-3628
CHARGING THE BATTERY
Working
When
Charging
Charge
Complete
Brush
Jam
Low
Power
Low Speed: Blue Light
High Speed: Blue Flashing Light
Blue
Flashing
Light
Solid Blue
Light
Red
Flashing
Light
Red
Flashing
Light
CHARGING INSTRUCTIONS
The indicator light will flash red when it’s
power is low. Please charge it.
1. Before charging the unit, please ensure
that all water has been removed from the
clean and dirty water tanks and the
machine is dry.
2. To charge the machine, connect the
external charger cord to the unit and
plug into the wall outlet
MACHINE/BATTERY USE,
STORAGE AND CHARGING
• Battery takes 6 hours for initial charge
and 3.5 hours for normal recharge.
The indicator light on the front of the
machine will turn blue when the machine
is fully charged.
• Battery run time is approximately
30 minutes.
• Recommended ambient temperature
range 32 ºF to 110 ºF.
For optimal performance, the battery
must be charged every 3 months. Do
not charge the machine/battery for
more than 24 hours. Overcharging can
lead to battery overheating which can
lead to battery deformation and burns.
WARNING
INDICATOR LIGHT
EMPTYING THE DIRTY WATER TANK
1. Empty the Dirty Water Tank when or before the float shut-off activates and restricts
the suction. Once the float shut-off activates, you will hear a change in the pitch of
the vacuum motor letting you now it is time to empty the tank.
2. Remove the Dirty Water Tank from the machine by pulling on the red release lever
on the front of the tank and pulling the tank free from the machine.
3. Holding the bottom of the tank, release the two lock buttons (one in the front and
one in the back) .
4. Rinse the inside of the DIRTY WATER TANK and replace the LID, firmly tighten the
lock buttons.
5. Place the tank back on the machine by setting is straight down on the base until it is secure.
REFILLING THE CLEAN WATER TANK
1. When the machine no longer sprays water, check the CLEAN WATER TANK to see if
it’s empty.
2. If the CLEAN WATER TANK is empty, turn off the machine using the POWER SWITCH.
FLOOR DOCTOR HARD FLOOR CLEANER
• Removes dirt build-up, grease and stains from most types of hard surfaces
• Scientifically engineered for professional quality results
• For use on stone, tile, laminate, sealed hard wood floors
• Safe for kids and pets
1. To properly store the unit, first empty both the clean water and dirty water tanks.
2. Second, rinse both the clean water and dirty water tanks with hot tap water and dry
thoroughly.
3. Place both the clean and dirty water tanks back on the unit and place unit on the
included storage tray.
4. Store indoors in a dry place. Do not expose cleaner to freezing temperatures.
5. Water will drip from the brushes and underside of the cleaner after use and may
puddle. To avoid damage to wood and laminate flooring and to avoid potential slip
hazard, do not leave product on wood and laminate surfaces after use – remove
from hard surface and place in tray.
NOTE: Residual water may trickle from the machine after the machine is turned off.
Storing the machine on the included tray will mitigate unattended water damage to
floors from residual liquid.
HOW TO CLEAN
CLEANING SOLUTION
STORAGE INSTRUCTIONS
