5. Align marks on tubing with outside edge of the
tubing Clamp.
6. Reinstall collet screw firmly.
! IMPORTANT Tighten tubing seal clamp screw.
Be sure to tighten firmly to prevent “tubing
walk.” Tubing walk can occur when the tubing
seal is the wrong size or is not sufficiently tight
to keep the rollers from pulling the tubing
through the pump as it rotates.
pg. 13
Mark an 11 inch
length of tubing
and locate the
marks at the
outside edge of
the tubing seal
(see arrows)
Tubing seal size
varies with the
selected tubing size.
See tables on
following pages for
details
Align the tubing marks
with the outside edge
of the Hose Seal.
