© Copyright 2001, ITT Industries
Printed in U.S.A.
All Rights Reserved
Form: 81000-343
11/01
UNITED KINGDOM
Flojet, Unit 1, Avant Business Centre
Denbigh West Industrial Estate
Milton Keynes, Bucks, England MK1 1DL
Tel: 44 1908 370088
Fax: 44 1908 373731
U.S.A.
Flojet
20 Icon
Foothill Ranch, CA 92610-3000
Tel: (949) 859-4945
Fax: (949) 859-1153
Standard installation of a three pump / three
transfer valve assembly on a riser/spacer
(See front mount)
Fig. #9
Standard five pump assembly installation
Fig. #10
Front
Mount
Side
Mount
Note:
Tygon Hose
Center Line Run
N5000-530
Front
Mount
Side
Mount
Note:
Tygon Hose
Center Line Run
N5000-530
Model N5000 Specifications
Pump Design
................Positive Displacement, Double Diaphragm
Power Source
........CO
2
Gas, Nitrogen or Compressed Filtered Air
Materials of Construction (wetted parts)
....................Celcon M90,
Santoprene
®
, EPDM, 302 or 304 Stainless Steel Spring
Temperature Limits
..................................34˚ - 120˚ F (1.1˚ - 49˚ C)
Weight
....................................................................1.22 lbs. (0.55 kg.)
Dimensions
..................................5-3/8" H x 6-7/32" W x 2-7/16" D
(135.7 mm x 157.9 mm x 61.9 mm)
Displacement
..........................................................2.5 oz. per cycle
Self Priming
......................................................Up to 10 ft. (3.05 m)
Operating Pressure
....20 psi (1.4 bar) min. / 80 psi (5.5 bar) max.
Liquid Inlet Pressure
......................................10 psi (0.7 bar) max.
Flow Rate
..................................4.0 oz. (118.3 ml)/sec. - Open Flow
Approvals
..................................................................NSF listed & CE
Vacuum Shutoff
......Automatically shuts off pump at 21" Hg when
product supply is depleted. High altitude versions available for
installation where altitudes exceed 3,000 feet (914 m).
Features
1.
Supplies up to two fast flow or four standard flow dis-
pensing valves at remote locations.
2.
Fully automatic, operates only when beverage is
being dispensed and maintains constant pressure at
the dispensing valve.
3.
Shuts off automatically when bag is empty and
restarts when a full bag is connected.
4.
High suction capability empties the bag down to a
minimum residual.
5.
Brass tee and elbow CO
2
shutoff valve quick-discon-
nect allows us to manifold CO
2
inlet line.
6.
All pumps come with a stainless steel 3/8 inch (9.5
mm) product out barb port.
Accessories
Quantity
Part No.
Description
one
20590-000
Bracket for Pumps
one
20594-000
Bumper Guard
two
20595-000
Tube Hangers
one
1520-000
1/4 Inch (6.3 mm) Brass Tee
CO
2
Shutoff Valve
one
1521-000
1/4 Inch (6.3 mm) Brass Elbow
CO
2
Shutoff Valve
one
1500-030A
Transfer Valve
IF USED WITH CO
2
OR N
2
BE SURE THE AREA IS
WELL VENTILATED
ONLY USE PUMPS WITH SPECIFIED PRODUCTS. DO
NOT PUMP FLAMMABLE LIQUIDS OR USE WHERE
FLAMMABLE VAPORS ARE PRESENT
WARNING
AVAILABLE PORT FITTINGS
Gas Inlet:
• 1/4” (6.3mm) Barb, plastic, straight
• 1/4” (6.3mm) Barb, brass w/CO
2
shut-off - straight, tee
or elbow.
• John Guest for 1/4” O.D. tubing, plastic or brass
w/CO
2
shut-off
Gas Outlet
:
• 1/4” (6.3mm) Barb, plastic, straight
Product Inlet & Outlet:
• 1/4” (6.3mm) Barb, stainless steel, straight or elbow
• 3/8” (9.5mm) Barb, plastic, straight
• 3/8” (9.5mm) Barb, stainless steel, straight or elbow
• 1/2” (12.7mm) Barb, stainless steel, straight
• John Guest for 1/4” or 3/8” O.D. tubing, plastic
