STANDARD THREE OR TWO PUMP FRONT MOUNTING INSTRUCTIONS
Fig. #7
Proper Handling Of
Retainer Bar Assembly
Caution!
Pull retainer bar assembly from
two positions on either side of pump with your
fingers.
Do Not
use a screw driver for removal of
the pump to maintain future retainer bar assembly
tension. Note: The CO
2
manifold would change if a
Shurflo pump is installed.
Fig. #8
Standard installation of a three pump assembly
without a transfer valve on a riser/spacer.
(See front mount)
Front
Mount
Side
Mount
Note:
Tygon Hose
Center Line Run
N5000-530
