Floe VSD 3800, Assembly Instructions Manual

Page: 5 / 56

IMPORTANT NOTE:
DO NOT USE IMPACT WRENCH
WHEN ADJUSTING THE EASY
LEVEL LEGS
Warnings
Tips

Torque nuts to specification, not bolts.

Place parts and fasteners in designated locations prior to each step.
 Before tightening fasteners to specified torque, ensure that the lift is square.

Measure from corner to corner (A to C/B to D) to verify that the lift is square.

Measure distance between corner posts (A to B, B to C, C to D, A to D) above frame beam and at the
top of the corner post to verify that the lift is square.

Ensure that the lift is level and square before proceeding to install the V-Brace or Ball Screw Tube.

Assemble cradle clamps with given bolt and nut before installing onto cradle beam.

Use a marker to denote fasteners which have been tightened to the specified torque.

Read instructions and understand them before attempting assembly.
