6
- - - - - - - - - - - - IMPORTANT- - - - - - - - - - - -
For wiring and light replacement parts, see the assembly
instructions.
Using your FLOE trailer
Trailer Lighting System
wire HarneSS ConneCtor
• Your trailer is equipped with a plug-in receptacle on the
trailer tongue (FIG. 1) to keep the electrical connector
protected when not in use, as shown.
• To ensure trouble-free use, periodically inspect end plug for
tight, corrosion-free contact and apply electrical grease as
necessary to prevent future corrosion.
The wiring diagram below provides the information needed
for wiring the towing vehicle harness/connector. It is
important that the proper connections be made and that the
system is tested before using your trailer.
wiring teSter
To test the wiring
on your tow vehicle
you can purchase an
inexpensive tester
at most auto supply
stores.
White - Grounds all lights
Brown - Front & rear marker lights
& tail lights
Yellow - Left turn/brake light
Green - Right turn/brake light
Lights must be properly connected to the tow vehicle and
checked prior to each trailer use. Do not use trailer on
any public road without all lights functioning properly.
Malfunctioning lights fail to give other motorists proper
notification of your actions and location which can cause a
serious or fatal accident.
warning
Make sure the wiring harness for the lighting system is
long enough so that it is does not become unplugged when
turning sharp corners. Disconnected lights can cause a
serious or fatal accident.
warning
proper ConneCtion of wiring
HARnESS TO vEHiCLE. ALwAyS mAkE SURE
COnnECTiOnS ARE TiGHT.