![Flo-tech mc4000 User Manual Download Page 25](http://html1.mh-extra.com/html/flo-tech/mc4000/mc4000_user-manual_2306497025.webp)
Specifications
SPECIFICATIONS
Display
Accuracy
±0 .1% + 1 digit from midrange
A to D
16-bit, Linearity ± (1 LSB + 1 digit)
Display
Graphic LCD display with back light, 128 x 64 pixels; back light auto-off function
Inputs
Flow
Pressure (P1/P2)
Temperature (T)
RPM
10 mV…5V
P-P
sine wave from turbine; frequency range 0 .5…10 kHz scalable
Dual 4…20 mA
Pt-100 –50…500° C
5…24V active pickup; range 30…60,000 rpm
Keypad
Nine keys on the front; backlight is illuminated for 30 seconds after any key is pressed
Power
Battery
Charger
6V, 2 Ah
100…240V AC
A fully charged battery permits about four hours of operation with two pressure sensors connected and
the backlight switched off
Memory
2 .5 MB of datalogging memory can store up to 80,000 samples in all four signal channels, calculated
power, date and time; the sampling rate is selectable from 1 sec…120 min
Peak & valley functions stores the maximum and the minimum values of the P1 and P2 pressure sensors
Two fast transients recorders with a sampling rate of 1 ms and a capacity of 240,000 measurements
monitor pressure sensor P1 . The recording trigger threshold is programmable between 0…100%
Tare
Pressure channels P1 and P2 are independently set to zero
Connections
Two eight-pin, 12 mm sensor plugs, USB data connection, battery charging connection
Indicators
Green LED between the two sensor plugs indicates power to the battery charging circuit
Environmental
Ambient Temperature
Humidity
–22…158° F (–30…70° C)
0…90% non-condensing .
Sensors
Accuracy
± 1% of reading @ 32 cSt
Repeatability
± 0 .2%
Pressure max
5800 psi (400 bar) max; 5000 psi (345 bar) max for SAE 20 and G 1-1/4 size models
Turbine response
time
≤200 ms
Environmental
Fluid Temperature
Ambient Temperature
Humidity
–4…300° F (–20…150° C)
–22…158° F (–30…70° C)
0…90% non-condensing
Materials
Turbine
Housing
6013-T651 anodized aluminum
Turbine rotor
T416 stainless steel
Rotor supports
6061-T6 aluminum alloy
Rotor shaft
T303 stainless steel
Ball bearings
440 C stainless steel
Hub cones
6061-T6 aluminum alloy
Retaining rings
6061-T6 aluminum allow
Adapters/plugs
6061-T6 anodized aluminum
Seals
Buna N
Pickup
Housing
6016-T6 nickel plated
Nut
T303 stainless steel
Connector
Brass
Pressure Sensor
Case
300 Series stainless steel
Diaphragm
17-4 PH stainless steel
Page 25
February 2015
TST-UM-00017-EN-03