Slide the retaining washers onto the axle and
ensure they lock into the forks.
Attach and fully tighten the wheel nuts.
Lift the front wheel off the ground and give it a
spin to ensure it rotates without hinderance and
is ‘true’.
Position the white front reflector to the right of the
handlebar stem so that it points directly forwards
and is within 5 degrees of the vertical. Attach the bell
in the same manner to the left of the handlebar stem.
Reflectors and bell
Position the red rear reflector on the seat post so
that it points directly backwards and
is within 5 degrees of the vertical.
