FLIR X6520sc Series, User Manual

Page: 17 / 112

Introduction
5
5.1 Camera system components
The FLIR X6520sc infrared camera and its accessories are delivered in a transport case
that typically contains the items below.
• FLIR X6520sc camera with removable LCD touchscreen.
• Portfolio that includes important information on the camera:
◦ Packing list.
◦ Factory acceptance report.
◦ Calibration curves (if applicable).
◦ Camera files on a CD-ROM.
◦ Optical cleaning tissue.
◦ A set of user instructions.
◦ Filter-holding tool.
◦ Micro SD card with an SD adapter.
• Camera power supply.
• Camera cables:
◦ Power supply.
◦ Gigabit Ethernet (GigE) with locks.
◦ 50 Ω coaxial cable for sync (yellow colored).
◦ 50 Ω coaxial cable for triggering (orange colored).
◦ 50 Ω coaxial cable for lock-in (green colored).
◦ 75 Ω coaxial cable for general purposes (blue colored).
◦ LCD extender cable (with right-angle USB connectors).
• LCD connector protective cap.
There may also be additional items that you have ordered such as software or CDs.
5.2 System overview
The FLIR X6520sc infrared camera system has been developed by FLIR to meet the
needs of the research community. The camera makes use of an advanced 640 × 512
readout circuit (ROIC), mated to a mercury cadmium telluride (MCT) detector to cover
the 3.7–4.8 µm mid-wave infrared band.
The FLIR X6520sc is a stand-alone imaging camera that interfaces to host PCs using
standard interfaces, including GigE and Camera Link Base.
#T810207; r. AA/43061/43086; en-US 9