9.1
Isotherms Overview
Isotherm Alarms allow you to set a high and/or low temperature set point. The
image colorings show the areas that exceed the set point temperatures. To
configure the Isotherms, open the Color menu and select the desired alarm
mode. Use the navigation arrows to select the temperature set point. The hot
alarm color cold is red while the cold alarm color code is blue.
9.2
Isotherm Screen Shots
Figure 9.1
‘Above Alarm’ (left) shows a high temperature alarm setup. The alarm set point is
shown on the bottom of the display (red), use the up/down arrows to adjust the set point. ‘Be-
low Alarm’ (right) shows a low temperature alarm setup. The alarm set point is shown on the
bottom of the display (blue), use the up/down arrows to adjust the set point.
#NAS100060; r. AA/71942/71942; en-US
30
Summary of Contents for Thermal MSX Videoscope Kit
