FLIR Thermal MSX Videoscope Kit, User Manual

Page: 20 / 44

Programming Menus 7
7.5 Color Palette Menu
Figure 7.6 Accessing the Color Palette mode.
To select a display color palette, press Menu on the Color icon and use
the navigation arrows to scroll. Press Menu when the desired color palette is
selected (Iron, Rainbow, Gray, Above Alarm, or Below Alarm).
In the Above/Below Alarm modes (known as ‘Isotherms’), you select a high
alarm set point (for Above Alarm mode) and a low alarm set point (for Below
Alarm mode). The colorations in the thermal image indicate the sections of
the test area that exceed the set point limit. Use the arrow buttons to set the
temperature limits (the set point is shown on the bottom of the display). The
vertical color bar graph on the right side of the display indicates the degree to
which the alarm set point is exceeded. See Section 9,
Isothermal Color
Alarms , for more.
Figure 7.7 Selecting a Color palette or an Isotherm Alarm (Above and Below) mode.
#NAS100060; r. AA/71942/71942; en-US 16